GS-S3/1900 Inclined Auger Screw Conveyor with Round Hopper

This BRAND NEW IOPAK stainless steel inclined auger is very useful for conveying powders or granules

Technical Details:
Capacity 3-5 cubic metres per hour (Product dependent)
Hopper Size: 200L
Discharge Height: 1,900mm
It has a 114mm dia auger with 70mm pitch flights. The infeed hopper has mouth dimensions of 690 x 965mm and is set at 1000mm above floor level.
The discharge height is set at 1900mm above floor level.

The screw is driven by a 415V AC, Three Phase, 1,400mm (Input) TEFC, 1.5kW Gear Motor which is directly coupled to the screw.
A 0.35KW eccentric vibrator is fitted to the hopper wall to assist feed.
Construction is of Stainless Steel and the unit is mounted on wheels and lockable castors.

Lift Capacity: 3m³ /hr
Hopper Size: 200L
Conveyor Height: 1,900mm
Power Supply: 380V, 50Hz, 3 phase, 5 pin, 10 Amps, neutral

Unit comes complete with control panel which includes both manual and automatic selection.
* Recommended Oil: TORA 220 or equivalent (if the gearbox is 7 years old or more, TORA 320 or equivalent)